Walk a round on your phone: recording, interruption, corrections, skipping, photos
The walk-through screen is the round’s own page: it pages by section, has large input fields and works with one hand. You record per point, and the page can be interrupted and resumed.
Before you start
Section titled “Before you start”- Right: “Operator rounds: record” — opround:record. The view right is enough to look (“View only: …”).
- Prerequisite: the round is due in the log; open the page from the log’s Operator rounds element (Start / Continue).
- Start-of-round question (if shown). If the round’s points depend on which line is running and the Production plan gives no clear state, a “Plant status at the start of the round” question is at the top (e.g. “running?”, “what is running on it?”). Answer first: until then the dependent points stay hidden. You can change the answer while the round is open.
- Choose a section. Use the Section picker or Previous / Next; progress reads “N / M points recorded”.
- Record a value. The field fits the point: number, OK / Not OK / N/A, Yes / No, choice, text. Record sends it. The limit shows under the field (“Limits: 10 – 20 bar”).
- Out-of-limit value. You get “Below the limit (min …)” / “Above the limit (max …)” at once, and a comment is asked for. With a hard limit the value cannot be recorded (“can’t be recorded (strict limit)”).
- Skip. Skip with a reason: a reason is required; later Record a value instead.
- Photo. Where the point asks, take a photo with the camera or pick one from the gallery (up to 10 per point). A point that requires a photo cannot be sent until the photo has uploaded.
- Finish. When each required point has a value (or was skipped with a reason): Finish round (done). After finishing, no new values can be added; existing ones can be corrected.
Interruption and lost connection
Section titled “Interruption and lost connection”- You can interrupt the round: recorded points are on the server, and Continue resumes from there.
- If the connection drops, the value waits on the device (“Waiting on device”) and uploads by itself when the connection returns. The top of the page says “N value(s) waiting on this device — NOT on the server yet”; while there are any, do not close the page, and the round cannot be finished.
- If your sign-in expired: “Waiting for sign-in”; after signing in again the value uploads.
- If the server did not accept it, you see “Not recorded” and the reason; OK, I’ll record it again.
- The recording time is the device’s time (a queued value keeps it). A value that waited more than 12 hours cannot be recorded afterwards: record it again with the current time.
Corrections and parallel recording
Section titled “Corrections and parallel recording”- Correction. You change an already recorded value with Correct; the reason for the correction is required. The previous value is not lost: under Earlier values (N) you see who recorded it and when.
- Several operators in one round. Everyone writes under their own name and time. If someone else wrote the same point meanwhile, your value is saved as a correction (with the system reason “parallel recording”), theirs stays in the history, and the page says “Meanwhile X also recorded this …”. Above the section you see who is working on it (“Also working here: …”, from the last 15 minutes of writes).
- Closed round, closed log. After the round is finished you can correct existing values; if the round’s log is already closed, only a role allowed to correct closed shift logs can correct. A round without a log can be corrected for 24 hours after it closed by the recorder, after that the settings right is needed.
If it worked
Section titled “If it worked”Next to the value you see “Recorded” and the recorder’s name and time; the section’s progress grows. A finished round has status Done.
Common problems
Section titled “Common problems”| What you see | Why | What to do |
|---|---|---|
| “Enter a value — or skip it with a reason.” | Empty submit. | Type a value or Skip with a reason. |
| “The value is outside the strict limits, so it can’t be recorded.” | Hard limit. | Check the reading; the limit is set in the template. |
| “This point needs a photo (wait until it has uploaded).” | Required photo. | Wait for the upload. |
| “N required point(s) still missing.” | Finishing needs every required point. | Record, or skip with a reason. |
| “First answer the start-of-round question (which line is running).” | The question hides a dependent point. | Answer at the top of the page. |
| “The device clock is in the future …” | The device time is wrong. | Fix the clock and record again. |